Dobry den,

Electrolux ESL 46050 hlasi chyby"
i70
i60
i70

popis chyb z manualu:

“i60” Code - family : Heating Problem
“i60” – code – heating
- Alarm code storing in memory, displayed only in service mode, program continues without activation
of heating element.
- During heating steps the rising of temperature is monitored, the monitoring is restarted every 3min.
- Within these 3 minutes temperature has to rise in minimum about 1°C.

“i70” Code - family : NTC Problem
“i70” - code
- Alarm code storing in memory, displayed only in service mode, program continues without activation
of heating element.
- Monitoring start immediately after initialisation of the program
- NTC voltage has to be in range 0,04 – 4,7V.
- Debounce time 10sec


Co je podle Vas nejvetsi problem NTC (2x chyba) nebo ohrivac vody?